REFCAST LC 5010 TSR
Technical Datasheet
REFCAST LC 5010 TSR
PRODUCT DATA SHEET: SHARADAA REFCAST LC 5010 TSR
Aggregate : Calcined Clay
Bond : Ultra Fine
Type of Setting : Hydraulic
Water required for casting : 7 – 8 %
Packing : Dry powder will be packed in 25 kgs Poly-lined HDPE bags
Shelf Life : 9 months
Application Method : Vibrocasting
Form De-moulding Time : 8 hour
| Properties | Unit | Specification | Test Method |
|---|---|---|---|
| Service Temperature | °C | 1300 (max) | BIS 10570 |
| Maximum Grain Size | mm | 6 (max) | BIS 10570 |
| Bulk Density dried at 110°C/24 hrs | gm/cc | 2.30 (min) | BIS 10570 |
| Cold Crushing Strength dried at 110°C/24 hrs | kg/cm2 | 550 (min) | BIS 10570 |
| Cold Crushing Strength Fired at 1100°C/3 hrs | kg/cm2 | 550 (min) | BIS 10570 |
| Modulus of Rupture Dried at 110°C/24 hrs | kg/cm2 | 100 (min) | BIS 10570 |
| Modulus of Rupture Fired at 1100°C/3 hrs | kg/cm2 | 100 (min) | BIS 10570 |
| Permanent Linear Change Fired at 1100°C/3 hrs | % | ± 0.3 | BIS 10570 |
| Chemical Analysis Al2O3 Fe2O3 Mgo | % | 45 (min) 2 (max) 3 (max) | BIS 12107 BIS 12107 BIS 12107 |
NOTE:
- The properties shown are for vibratory cast material only unless specified otherwise
- Water requirement indicated are based on laboratory test conditions. Actual water requirement may vary subject to site conditions
- Types of Mixer Paddle type with 33 RPM