NANOBOND CASTABLES

NANOBOND 90AL / 80AL / 60AL

High Performance Nanobond Castables

PRODUCT DATA SHEET: High Performance Nanobond Castables

PROPERTIES	NANOBOND-90AL	NANOBOND-80AL	NANOBOND- 60AL
Product Characteristics
Type of Bond	Nano bond	Nano bond	Nano bond
Type of Setting	Hydraulic	Hydraulic	Hydraulic
Aggregate	WFA/WTA	Cal. Bauxite	Sintered Mullite
Service Temp °C (Max)	1400	1300	1300
Maximum Grain Size (mm)	6	10	10
Chemical Properties
Al2O3 (Min)	90	80	60
Fe2O3 (Max)	0.5	1.8	1.0
Physical Properties
Cold Crushing Strength (Kg/cm2) (Min)
After drying at 110 °C / 24 hrs	1000	800	700
After firing at 800 °C /3 hrs	1200	900	800
After firing at 1400 °C /3 hrs	1100	1000	900
Cold MOR (Kg/cm2) (Min)
After drying at 110 °C /24 hrs	180	160	120
After firing at 800 °C /3 hrs	220	180	140
After firing at 1400 °C /3 hrs	200	200	160
Thermal Properties
Thermal Conductivity at 600°C hot face (Kcal/hr/m/°C ) (Max)	2.3	1.8	1.8
Reversible thermal Expansion at 1000°C (%) (Max)	1.4	1.2	1.2
Hot MOR at 1100°C (Kg/cm2) (Min)	200	200	200
Aluminium Resistance Very Good	Very Good	Very Good	Very Good
Apparent Porosity at 1200°C (%)(Max)	14	14	14
Permanent Linear Change at 1200°C(%)(Max)	± 0.5	± 0.5	± 0.5
Installation Inputs
Storage	Under Covered Shed	Under Covered Shed	Under Covered Shed
Shelf Life	6 Months	6 Months	6 Months
Installation Method	Vibration	Vibration	Vibration
Water %	4 - 5	4 - 5	4 - 5
Setting Time	6 Hrs	6 Hrs	6 Hrs
Machinery Required	Paddle Mixer	Paddle Mixer	Paddle Mixer
Material Required per M3	3000 Kg	2800 Kg	2600 Kg
Form demoulding time	8 Hrs	8 Hrs	8 Hrs
Packaging	25 Kg	25 Kg	25 Kg
Heat Curing	Refer Chart	Refer Chart	Refer Chart

Remarks: